Sensor parameters

Note: document contents may change due to software changes or updates without any notice.

Visit sensors section to learn more about sensors configuration.

Auto detection

Server detects available device sensor parameters automatically, but user should configure them manually. This allows user to choose which sensors to monitor.

  1. Make sure all needed sensors are connected to GPS device, for example: ignition, doors, fuel, inputs, outputs and etc.
  2. Drive your vehicle, turn on and off ignition, open and close doors and so on.
  3. Server will auto learn and detect all possible sensor parameters.
  4. Detected sensor parameters will appear in sensor properties Parameter select box.

Description

Below are listed most common sensor parameter names, still they vary depending on GPS device model and capabilities.

Sensor

Description

Possible values

alaX

ala – Alarm, X refers to alarm number

0 = no alarm, 1 = alarm

acc

ACC status

0 = off, 1 = on

accv

ACC voltage

Value

batl

Battery level

Value

batp

Battery percentage

Value

batv

Battery voltage

Value

bats

Battery status

0 = not charging, 1 = charging

diX

di – Digital Input, X refers to input number

0 = off, 1 = on

doX

do – Digital Output, X refers to output number

0 = off, 1 = on

aiX

ai – Analog Input, X refers to input number

Value

aoX

ao – Analog Output, X refers to output number

Value

canX

can – CAN port data, X refers to CAN port number

Value or String

tempX

t - temperature, X refers to temperature meter number

Value

fuelX

fuel - Fuel level, X refers to fuel meter number

Value

pump

Fuel pump status

0 = off, 1 = on

ibut

iButton for driver ID

String

rfid

RFID for driver ID

String

odo

Absolute odometer in km

Value

odor

Relative odometer in km (between two records)

Value

engh

Absolute engine hours

Value

enghr

Relative engine hours (between two records)

Value

gsmlev

GSM signal level, signal strength

Value

gpslev

GPS signal level, number of satellites

Value

hdop

HDOP

Value

pdop

PDOP

Value

vdop

VDOP

Value

track

If device is in tracking mode or not

0 = no, 1 = yes

sleep

If device is in sleep mode or not

0 = no, 1 = yes

move

If device is moving or not

0 = no, 1 = yes

accel

Accelerometer status

0 = no, 1 = yes

dlog

Data logging status

0 = no, 1 = yes

balance

SIM card balance

String

lac

GSM Location Area Code

String

cellid

GSM Cell ID

String

mcc

MCC

String

mnc

MNC

String

can_sysev

CAN system event

String

can_vemot

CAN vehicle motion

String

can_clus

CAN clutch pedal state

String

can_bres

CAN break pedal state

String

can_accs

CAN acceleration pedal state

String

can_crus

CAN cruise control state

String

can_ptos

CAN PTO state

String

can_enplcs

CAN engine PLCS

String

can_tyreloc

CAN tire location

String

can_axlew

CAN axle weight

String

can_axloc

CAN axle location

String

can_haninf

CAN handling information

String

can_dirind

CAN direction indicator

String

can_flev

CAN fuel level

String

can_fcr

CAN fuel consumption rate

String

can_feco

CAN fuel economy

String

can_pto

CAN PTO

String

can_hrfc

CAN HRFC

String

can_dist

CAN distance

String

can_amt

CAN ambient air temperature

String

can_ect

CAN engine coolant temperature

String

can_rpm

CAN RPM

String

can_engh

CAN engine hours

String

can_srdist

CAN service distance

String

tco_dist

TCO distance

String

tco_trip

TCO trip

String

tco_vespd

TCO vehicle speed

String

tco_rpm

TCO RPM

String

 

Contact us

Error: Only up to 6 modules are supported in this layout. If you need more add your own layout.